Specify the loopback address to be used by the device to receive incoming configuration changes.
- SNMP ID:
- 2.11.51.3.2
- Console path:
- Setup > Config > Sync > TLS-Connections
- Possible values:
Max. 39 characters from [A-Z][a-z][0-9].-:%
- Default:
- empty
- Possible arguments:
- Name of the IP networks whose address should be used
- "INT" for the address of the first Intranet
- "DMZ" for the address of the first DMZ
- LBO…LBF for the 16 loopback addresses
- Any valid IPv4 or IPv6 address
