Bridge group

Assigns the logical interface to a bridge group to enable bridging from/to this logical interface via the LAN bridge. If assigned to a common bridge group, several logical interfaces can be addressed at once and they appear to the device to be a single interface. This can then be used for Advanced Routing and Forwarding, for example.

Note: A requirement for data transfer from/to a logical interface via the LAN bridge is the deactivation of the global "isolated mode" which applies to the whole of the LAN bridge. Furthermore, the logical interface must be assigned to a bridge group. With the setting "none", no transfers can be made via the LAN bridge.
SNMP ID:
2.20.11.5 
Console path:
Setup > LAN-Bridge > Port-Data
Possible values:
BRG-1
BRG-2
BRG-3
BRG-4
BRG-5
BRG-6
BRG-7
BRG-8
None
Special values:
If the interface is removed from all bridge groups by setting "none", then there is no communication between the LAN and WLAN via the LAN bridge (isolated mode). With this setting, LAN/WLAN data transfers over this interface are only possible via the router.
Default:
BRG-1

www.lancom-systems.com

LANCOM Systems GmbH | A Rohde & Schwarz Company | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E‑Mail info@lancom.de

LANCOM Logo