Module-1-TX-Reduct.

If you use an antenna with a high amplification factor, you can use this entry to attenuate the transmission power of your base station to the transmission power permitted in your country in the frequency band in question.

If the field is left blank, the default setting defined in the configuration profile of relevant WLAN profile will be used.

Transmission power can be reduced to a minimum of 0.5 dBm in the 2.4 GHz band or 6.5 dBm in the 5 GHz band. This limits the maximum value that can be added to 17.5 dBi in the 2.4 GHz band and 11.5 dBi in the 5 GHz band. Please ensure that your combination of antenna, cable and lightning-protection complies with the legal requirements of the country where the system is operated.

The receiver's sensitivity is unaffected by this.

Note: The current transmission power is displayed by the device's web interface or by telnet under Status > WLAN statistics > WLAN parameters > Transmission power or with LANconfig under System information > WLAN card > Transmission power.
SNMP ID:
2.37.1.4.22 
Console path:
Setup > WLAN-Management > AP-Configuration > Accesspoints
Possible values:

0 … 999 dBi

Default:
empty

www.lancom-systems.com

LANCOM Systems GmbH | A Rohde & Schwarz Company | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E‑Mail info@lancom.de

LANCOM Logo