Using this parameter, you define the maximum number of packets the device may combine into one aggregate. Aggregation in IEEE 802.11n WLAN transmissions combines multiple data packets into one large packet, so reducing the overhead and speeding up the transmission.
- SNMP ID:
- 2.23.20.19.20
- Telnet path:
- Setup > Interfaces > WLAN > Interpoint-Transmission
- Possible values:
0 … 11/16/24 (device dependent)
- Special values:
- 0
- The device automatically uses the highest value allowed on the hardware side.
- Default:
- 0
