Masq.-IP-Addr.

Almost all Internet providers usually have the remote device assign a dynamic IP address to your router when it establishes the connection. If your Internet provider has assigned you static IP addresses, or if you wish to operate masquerading for your VPN network, you assign it to the respective connection here. If the masquerading IP address is not set, then the address assigned when the connection was established is used for masquerading.

Note: You need to set a masquerading address for a VPN connection if you wish to mask a private network behind this address in the VPN network.
Note: This setting is also necessary if a private address (172.16.x.x) is assigned during PPP negotiation. Normal masquerading is thus impossible as this type of address is filtered in the Internet.
SNMP ID:
2.2.20.9 
Telnet path:
Setup > WAN > IP-List
Possible values:

Valid IPv4 address, max. 15 characters from [0-9].

Default:
0.0.0.0

www.lancom-systems.com

LANCOM Systems GmbH | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E-Mail info@lancom.de

LANCOM Logo