The defined broadcast rate should allow the slowest clients to connect to the WLAN even under poor reception conditions. A higher value should only be set here if all clients in this logical WLAN can be reached "faster".
If you select "Auto" here, the device automatically depends on the transmission rate of the slowest WLAN client in the network.
- SNMP ID:
- 2.37.1.1.14
- Telnet path:
- Setup > WLAN-Management > AP-Configuration > Networkprofiles
- Possible values:
- Auto
- 1M
- 2M
- 5.5M
- 11M
- 6M
- 9M
- 12M
- 18M
- 24M
- 36M
- 48M
- 54M
- T-72M
- T-96M
- T-108M
- Default:
- Auto
