This setting allows you to configure the frequency band in which the AP operates the 2nd physical WLAN interface.
Note: If a managed AP only has one physical WLAN interface, the AP ignores the settings for the 2nd physical WLAN interface.
- SNMP ID:
- 2.37.1.6
- Telnet path:
- Setup > WLAN-Management > AP-Configuration
- Possible values:
- Auto
- The AP independently selects the frequency band for the physical WLAN interface. The AP prefers the 5GHz band, if available.
- 2.4GHz
- The AP operates the physical WLAN interface in the 2.4Ghz band.
- 5GHz
- The AP operates the physical WLAN interface in the 5Ghz band.
- Off
- The AP disables the physical WLAN interface.
- Default:
- Auto
