Accept-AP

This action triggers the integration of a new AP. The action accepts different arguments depending on the firmware version of the device. A MAC address must be specified in any case; further arguments are optional.

Syntax used in versions before LCOS 9.00
[-c] <WTP-MAC> [<Profile>] [<Name>] [<IP>] [<Netmask>] [<Gateway>]
Syntax used in versions as of LCOS 9.00
<WTP-MAC> [<WTP-MAC-2> … <WTP-MAC-n> ] [-c] [-l <Location>] [-p <Profile>] [-i <IP>] [-n <Name>] [-m <Netmask>] [-g <Gateway>] [-1 <Wlan1Channels>] [-2 <Wlan2Channels>]
Note: If you define multiple MAC addresses, the device ignores the arguments [-i <IP>] and [-n <Name>].
SNMP ID:
2.37.7 
Telnet path:
Setup > WLAN-Management
Possible arguments:
-c
The WLC generates a configuration entry for the AP.
-l <Location>
The WLC supplements the AP configuration with the specified location.
We recommend that you store each location in the device as a unique field value pair so that, for example, the filter function in LCOS can be used at the console. The following field names are available:
  • co=Country
  • ci=City
  • st=Street
  • bu=Building
  • fl=Floor
  • ro=Room
-p <Profile>
The WLC supplements the AP configuration with the specified WLAN profile.
-i <IP>
The WLC supplements the AP configuration with the specified IPv4 address.
-n <Name>
The WLC supplements the AP configuration with the specified device identifier.
-m <Netmask>
The WLC supplements the AP configuration with the specified netmask.
-g <Gateway>
The WLC supplements the AP configuration with the specified gateway address (IPv4).
-1 <Wlan1Channels>
The WLC supplements the AP configuration with the first channel list.
-2 <Wlan2Channels>
The WLC supplements the AP configuration with the second channel list.

www.lancom-systems.com

LANCOM Systems GmbH | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E-Mail info@lancom.de

LANCOM Logo