Specify the wait time after which the AP switches to client mode and scans for any AutoWDS base networks. This assumes that there no configuration parts from a WLC available and the wait time for the start of the preconfigured integration (if set) has expired. If the AP finds a suitable SSID, the device attempts to authenticate at the WLAN in order to subsequently perform the reconfiguration process. The device authenticates with an express pre-shared key, which is hard-coded in the firmware.
- SNMP ID:
- 2.59.4.5
- Telnet path:
- Setup > WLAN-Management > AutoWDS
- Possible values:
0 … 4294967295 Seconds
- Special values:
- 0
- This value disables the wait time and the preconfigured integration procedure.
- Default:
- 1
