The documentation of your device consists of the following parts:
Installation Guide
The Quickstart user guide answers the following questions:
- Which software has to be installed to carry out a configuration?
- How is the device connected up?
- How can the device be contacted with LANconfig, WEBconfig or via the serial interface?
- How do I start the Setup Wizard (e. g. to set up Internet access)?
- How do I reset the device?
- Where can I find information and support?
User Manual or Quick Reference Guide
The User Manual or the Quick Reference contains all of the information required to setup your device quickly. It also contains all of the important technical specifications.
Manual on PBX functions (only for models with VoIP support)
The PBX Functions manual gives you detailed step-by-step instructions on commissioning a VoIP router as a PBX (private branch exchange) for a single location. Also described are the main operating instructions for users, and how to connect terminal equipment.
Reference manual
The Reference Manual goes into detail on topics that apply to a variety of models. The descriptions in the Reference Manual are based predominantly to the configuration with LANconfig. Also given for each LANconfig dialog is the corresponding path to find the parameters when working with WEBconfig, for example:
LANconfig: Wireless LAN / 802.11i/WEP / WPA or Private WEP settings
WEBconfig: LCOS Menu Tree / Setup / Interfaces / WLAN / Encryption
The paths for configuration via CLI/Telnet can be derived from this and are therefore not listed explicitly listed. The Telnet path to the encryption setting is, for example:
cd /Setup/Interfaces/WLAN/Encryption
Menu Reference
The Menu Reference comprehensively describes all of the parameters in LCOS, the operating system used by the devices. This guide is an aid to users during the configuration of devices by means of WEBconfig or the telnet console. The parameters are listed in the alphabetical order of the paths as they appear when carrying out a configuration with WEBconfig. Each parameter is described briefly and the possible values for input are listed, as are the default values.