Use this option to set the access rights for configuring the device via the SNMP protocol (SNMPv1 and SNMPv2). This protocol is required, for example, for configuring the device using the LANmonitor application.
- SNMP ID:
- 2.11.15.5
- Console path:
- Setup > Config > Access-Table
- Possible values:
- VPN
- Access is only possible via VPN.
Note: VPN-capable devices only.
- Yes
- Access is generally possible.
Note: By default via all interfaces except WAN.
- Read
- Access is read only.
- No
- Access is not possible.
Note: Default setting for the WAN interface.
