Use this option to set the access rights for configuring the device via the TELNET/SSH protocol. This protocol is required for configuring the device securely via the implemented Telnet console from text-based systems independent of the operating system.
- SNMP ID:
- 2.11.15.8
- Console path:
- Setup > Config > Access-Table
- Possible values:
- VPN
- Access is only possible via VPN.
Note: VPN-capable devices only.
- Yes
- Access is generally possible.
Note: By default via all interfaces except WAN.
- Read
- Access is read only.
- No
- Access is not possible.
Note: Default setting for the WAN interface.
- Default:
- Yes
- No
