Here you can optionally specify a source address for the device to use as the target address instead of the one that would normally be selected automatically.
- SNMP ID:
- 2.11.81.1.5
- Console path:
- Setup > Config > Radius > Server
- Possible values:
- Name of the IP networks whose addresses are to be used by the device.
- "INT" for the address of the first intranet.
- "DMZ" for the address of the first DMZ.
- Note: If the list of IP networks or loopback addresses contains an entry named "DMZ", then the associated IP address will be used.
- LB0 – LBF for one of the 16 loopback addresses
- Any valid IP address.
- empty
- Default:
