Defines whether the WireGuard tunnel should be established automatically—e.g., after the device starts or after the WAN connection has been established—or only when actual user data is being transmitted. This switch must be configured together with the "Persistent-Keepalive" option so that the WireGuard peer behaves like other peers that are intended to remain permanently active.
- SNMP ID:
- 2.19.70.3.16
- Console path:
- Setup > VPN > WireGuard > Peers
- Possible values:
- no
- The WireGuard connection is established only when user data traffic is present.
- yes
- The WireGuard connection is established permanently—regardless of whether user data is being transmitted.
- Default:
- yes
