Here you specify how the RADIUS server can be accessed from the WAN.
Note: Applies only to traffic from the IPv4 network. Traffic from the IPv6 network is controlled by the integrated firewall. By default, the IPv6 firewall prohibits access to the RADIUS server from the WAN.
- SNMP ID:
- 2.25.10.22
- Console path:
- Setup > RADIUS > Server
- Possible values:
- No
- The RADIUS server rejects WAN traffic from the IPv4 network.
- Yes
- The RADIUS server accepts WAN traffic from the IPv4 network.
- VPN
- The RADIUS server accepts only WAN traffic from the IPv4 network that arrives at the device over a VPN connection.
- Default:
- No
