Here you can optionally configure a sender address to be used instead of the one used automatically for this destination address. If you have configured loopback addresses, you can specify them here as sender address.
Note: If there is an interface called "DMZ", its address will be taken in this case.
- SNMP ID:
- 2.30.3.6
- Console path:
- Setup > IEEE802.1x > RADIUS-Server
- Possible values:
- Name of the IP networks whose addresses are to be used.
- "INT" for the address of the first intranet.
- "DMZ" for the address of the first DMZ.
- LBO…LBF for the 16 loopback addresses.
- Any IP address in the form x.x.x.x.
