Time-till-Preconf-Scan

Specify the wait time after which the AP switches to client mode and scans for an AutoWDS base network based on the corresponding values in the preconfiguration (the SSID and passphrase that are stored locally). This assumes that there are no configuration parts from a WLC available. If the AP finds a matching SSID, the device attempts to authenticate with the respective WPA2 passphrase and then perform the configuration procedure.

Parallel to this process, the configured wait time for the start of express integration.

Important: The process of preconfigured integration does not start if the settings for the AutoWDS base network (SSID, passphrase) are incomplete or if the preconfiguration timer is set to 0.
SNMP ID:
2.59.4.4 
Console path:
Setup > WLAN-Management > AutoWDS
Possible values:

0 … 4294967295 Seconds

Special values:
0
This value disables the wait time and the preconfigured integration procedure. The device immediately starts to count down the wait time for starting the express integration.
Default:
0

www.lancom-systems.com

LANCOM Systems GmbH | A Rohde & Schwarz Company | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E‑Mail info@lancom.de

LANCOM Logo