Using this setting you configure the behavior of the DHCPv6 server when it receives a confirm message from a client that does not yet have an IP address assigned to it. With the setting no, the server answers the message with a "Not-on-link" status; with the setting yes, it doesn't even answer.
Note: This parameter is only required for development tests and is not relevant for normal
operations.
- SNMP ID:
- 2.70.3.1.5
- Console path:
- Setup > IPv6 > DHCPv6 > Server
- Possible values:
- No
- Yes
- Default:
- No
