Trace filterss

Some traces, such as the IP router trace or the VPN trace, produce a large number of outputs. The amount of output can become unmanageable. The trace filters allow you to sift out the information that is important to you.

A trace filter is activated by adding the parameter “@“ that induces the following filter description. In filter description uses of the following perators:

Operator Description
(space) OR: The filter applies if one of the operators occurs in the trace output
+ AND: The filter applies if the operator occurs in the trace output
- Not: The filter applies if the operator does not occur in the trace output
" the output must match the search string exactly

An operator can be entered as any string of characters, such as the name of a remote station, protocols or ports. The trace filter then processes the output according to the operator rules, much like an Internet search engine.

www.lancom-systems.com

LANCOM Systems GmbH | A Rohde & Schwarz Company | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E‑Mail info@lancom.de

LANCOM Logo