Example applications

The command writeflash loads a firmware file into the device, and in the following example 10.0.0.1 stands for the IP address of the device and LC-L451-8.82.0083.upx for the file to be uploaded:
```
tftp -i 10.0.0.1 put LC-L451-8.82.0083.upx writeflash
```
```
tftp -i 10.0.0.1 put LC-L451-8.82.0083.upx MyAdmin:MyPasswd@writeflash
```
Use the command readmib to read our the device MIB:
```
tftp 10.0.0.1 get readmib device.mib
```
Use the command readconfig to read the configuration from the device using access credentials:
```
tftp 10.0.0.1 get root:MyPasswd@readconfig device.lcf
```
Use the command writeconfig to write the configuration to the device using access credentials:
```
tftp 10.0.0.1 put device.lcf root:MyPasswd@writeconfig
```

Note: The settings made for FirmSafe also apply to firmware uploads via TFTP.