Encryption settings

For access to a WLAN, the appropriate encryption methods and key must be set in the client station.

  1. To enter the key, in LANconfig navigate to Wireless LAN > General > Logical WLAN settings > Encryption.




  2. Enable encryption and match the encryption method to the settings for the AP.
  3. In WLAN client operating mode, LANCOM APs and LANCOM wireless routers can use EAP/802.1X to authenticate themselves at another AP. For this, select the desired client EAP method here. Note that the selected client EAP method must match the settings of the AP that the device is attempting to log onto.
Important: Depending on the EAP method, the appropriate certificates must be stored in the device:
Important: When working with WPA or 802.1X, settings may need to be made in the RADIUS server.

www.lancom-systems.com

LANCOM Systems GmbH | A Rohde & Schwarz Company | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E‑Mail info@lancom.de

LANCOM Logo