Use this table to configure the IPv6 networks that the device shares with the BGP neighbors.
Whether these networks are distributed depends upon the restrictions under .
Note: The minimum specification for a valid new entry is one Prefix.
- Prefix
- Contains the prefix (IPv6 address portion) of the network.
- Prefix length
- Contains the prefix length of the IPv6 network.
Note: The route is the default route for this address family if this entry contains the default setting 0.
- Routing tag
- Contains the routing tag for this network. The table under uses this entry to filter the communication with BGP neighbors.
- Type
- This item specifies whether the device always advertises this network, or only when the network appears in the active routing table.
- In the "Static" setting the network is always selected for advertisement.
- In the "Dynamic" setting, the network is only selected for advertisement if it appears in the active routing table.
- Comment
- Comment on this entry.
