Configuring Stanley AeroScout RTLS

To configure access to the Stanley AeroScout RTLS server with LANconfig, open the view Wireless LAN > General > Extended settings > RTLS and configure the section Stanley (AeroScout).





Stanley (AeroScout) RTLS operating
Enable this option to activate the forwarding to the AeroScout Location Engine.
Important: This feature is always activated for all WLAN modules of an access point.
Server address
Configure the IP address of the AeroScout Location Engine here.
Server port
Configure the server port of the AeroScout Location Engine if the default value is not being used.
Source address (optional)
Optionally, configure the source network for the connection to the AeroScout Location Engine. This is only necessary if multiple ARF networks are configured.
Vendor ID
Here you configure the vendor ID that the access point reports to the AeroScout Location Engine. If your version of the AeroScout Location Engine does not yet support the dedicated LANCOM vendor ID, you can switch to the vendor ID "Motorola".

www.lancom-systems.com

LANCOM Systems GmbH | A Rohde & Schwarz Company | Adenauerstr. 20/B2 | 52146 Wuerselen | Germany | E‑Mail info@lancom.de

LANCOM Logo