LANCOM SFP modules
  • LANCOM SFP modules

LANCOM SFP modules

Flexible connections for your switches, router and firewalls!

LANCOM switches, routers and firewalls with integrated SFP ports are characterized by maximum versatility in use. Be it for high-speed fiber-optic networking or as a copper-cabled Ethernet port: LANCOM SFP modules provide the specialized connections you need for your LANCOM device. And thanks to the tried-and-tested compatibility with LANCOM products, LANCOM SFP modules offer the best connections and highest reliability.

Fiber-optic SFP modules

The LANCOM SFP modules for fiber-optic networking of components in Gigabit speed are compatible with SFP ports of all of the switches, routers and Unified Firewalls listed in the table below.

LANCOM SFP-SX-LC1

SFP-Modul SX-LC1

Medium distances of up to 550 m

  • 1000BASE-SX standard (SFP)
  • Supports 50/125 µm (550 m cable length) and 62.5/125 µm (300 m cable length) multimode fiber
  • Wavelength 850nm
  • LC connector
  • Up to 1-Gbps link speed
  • Full-duplex mode
  • Operating temperature 0°C – 70°C
  • Support of digital diagnostic monitoring (DDM)*

LANCOM SFP-SX-LC10

SFP-Modul SX-LC10

Medium distances of up to 300 m

  • 10GBASE-SR/SW standard (SFP+)
  • Supports 50/125 µm (300 m cable length) multimode fiber
  • Wavelength 850nm
  • LC connector
  • Up to 10-Gbps link speed
  • Full-duplex mode
  • Operating temperature 0°C – 70°C
  • Support of digital diagnostic monitoring (DDM)*

LANCOM SFP-LX-LC1

SFP-Modul LX-LC1

Distances of up to 10 km

  • 1000BASE-LX standard (SFP)
  • Supports 9/125 µm (10 km cable length) single mode fiber
  • Wavelength 1310nm
  • LC connector
  • Up to 1-Gbps link speed
  • Full-duplex mode
  • Operating temperature 0°C – 70°C
  • Support of digital diagnostic monitoring (DDM)*

LANCOM SFP-LX-LC10

SFP-LX-LC10

Distances of up to 10 km

  • 10GBASE-LR/LW standard (SFP+)
  • supports 9/125 µm (10 km cable length) singlemode fiber
  • Wavelength 1310nm
  • LC Connector
  • Up to 10 Gbps link speed
  • Full-duplex mode
  • Operating temperature 0°C - 70°C
  • Support of digital diagnostic monitoring (DDM)*

* This functionality is only supplied by SFP modules of the latest generation (to be recognized from the LANCOM logo).

Copper SFP modules

In order to use a SFP port of the devices listed in the table below for Gigabit speed over copper lines, we offer the following SFP module:

LANCOM SFP-CO1

  • RJ45 Ethernet transceiver 1000BASE-T
  • Up to 1-Gbps link speed
  • Full-duplex mode
  • Operating temperature 0°C – 70°C

Note: For operating LANCOM SFP-CO1 in a LANCOM switch, a firmware LCOS SX 3.30 RU3 or higher is required. The firmware is available in our download section.

LANCOM SFP-Modul SFP-CO1 für Switches
LANCOM Direct Attached Cable

SFP Direct Attach Cable

Direct Attach Cable for networking of LANCOM switches.

LANCOM SFP-DAC10

  • Direct attach copper cable
  • 1 m cable length
  • Up to 10-Gbps link speed
  • Full-duplex mode
  • Operating temperature 0°C – 70°C

Note: For operating LANCOM SFP-DAC10 in a LANCOM switch, a firmware LCOS SX 3.30 RU3 or higher is required. The firmware is available in our download section.

Supported devices

Supported LANCOM devices SFP-SX-LC1 SFP-SX-LC10 SFP-LX-LC1 SFP-LX-LC10 SFP-CO1 SFP-DAC10
GS-3528XP
GS-3152X-series
GS-2352P
GS-2328-series
GS-2326+-series
GS-2310-series
GS-1326
WLC-1000
ISG-8000
ISG-4000
ISG-1000
1906VA-series
1900EF
1790EF
R&S®UF-910 / UF-900
R&S®UF-500

Inquiry

You have questions about our products or solutions, or are you looking for a LANCOM sales partner? Then let us know your wishes via contact form or feel free to contact us by phone.