LANCOM GS-2328P
LANCOM GS-2328P
  • LANCOM GS-2328P

LANCOM GS-2328P

Fully managed 28-port Gigabit Ethernet switch with Power over Ethernet for high-performance networks

The LANCOM GS-2328P is a high-performance component for modern network infrastructures in any industry or application. Equipped with 24 Gigabit Ethernet ports and 4 SFP+ ports supporting transmission rates of up to 10 Gbps, the LANCOM GS-2328P is the ideal solution for networking up to 28 devices. This switch supplies an overall output of 370 Watts and is also capable of powering all PoE devices connected to it (as per IEEE 802.3af/at) without any additional power supplies or cabling. It supports SD-LAN for automatic switch configuration via the LANCOM Management Cloud for an extremely easy and efficient way of managing your infrastructure.

Advantages

High power output on 28 ports

The LANCOMGS-2328P is equipped with 24 Gigabit Ethernet ports and 4 SFP+ ports supporting transmission rates of up to 10 Gbps. With a data throughput of 128 Gbps on the backplane, it offers full performance even under maximum load. This makes the switch a high-performance basis for modern network infrastructures in any industry or field of application.

Centralized power supply without additional cabling

As a high-performance PoE+ switch, the LANCOM GS-2328P supplies power to PoE devices such as IP phones, access points and surveillance cameras, without the need of any additional power supplies. It supports the two Power-over-Ethernet standards IEEE 802.3af and IEEE 802.3at (PoE+), with an overall output of 370 Watts. This makes the GS 2328P ideal for efficiently supplying power to the increasing number of PoE devices with high power requirements.

Efficient power-saving features

The LANCOM GS-2328P features Energy Efficient Ethernet technology. Thanks to numerous power-saving features as per the IEEE 802.3az standard, ports that are not transferring data are switched off automatically. This valuable feature saves precious resources.

Data transmission by 10 Gigabit

The LANCOMGS-2328P features 4 SFP+ ports supporting speeds of up to 10 Gbps. What's more, these ports can be bundled by LACP as per IEEE 802.3ad to achieve speeds of up to 40 Gbps. Your network offers noticeably higher performance, greater reliability, and even more speed.

Software-defined LAN

The LANCOM Management Cloud opens the way to the most advanced switch management: Software-defined LAN (SD-LAN). SD-LAN orchestrates the port profiles for each switch and automatically assigns the necessary network configuration, e.g. the required VLANs. At the click of a mouse, switch configurations that are fully customized to each site's network architecture are simultaneously rolled-out or updated.

Configurable access control

The LANCOM GS-2328P stops rogue clients from gaining unauthorized access to the network. This is ensured by secured access control on all ports as per IEEE 802.1X (port-based, single, multi, and MAC-based).

Secure remote management

Secure communication protocols such as SSH, SSL and SNMPv3 mean that the LANCOM GS-2328P is ideal for the professional remote management of networks. The switch also supports the TACACS+ protocol for authentication, authorization and accounting. This optimized solution promises maximum security for multi-site network management and monitoring.

IPv6 and IPv4 support

Thanks to the dual-stack implementation, the LANCOM GS-2328P operates in pure IPv4, pure IPv6, or in mixed networks. This means that it can be managed via both IP address standards, which makes it fully future-proof.

5-year warranty

Every day, our customers rely on products manufactured in Germany to the highest standards of quality. These quality standards also include fast help, just in case things should go wrong. This is why the LANCOM GS-2328P comes with a standard warranty of 5 years.

SD-LAN

Days become minutes

Optimally alligned, the LANCOM switch portfolio is suitable and applicable for complex, distributed networking scenarios. Thanks to SD-LAN over the Management Cloud, formerly manual device configuration is replaced by automated network orchestration. Each and every switch and access point at the various sites operates with a fine-tuned configuration.

 

Szenario_Behoerde_Solutionguide_DE

Easy switch configuration

SD-LAN orchestrates the port profiles for each switch and automatically assigns the necessary VLANs to the desired switch ports. Configurations can can be synchronized across locations with regard to the network architecture and rolled-out or updated simultaneously at the click of a mouse.

Switch_Infografik_Cloud

Technical features

  • 24 Gigabit Ethernet ports and 4 SFP+ ports (10 Gbps)
  • PoE support as per IEEE 802.3af/at for the efficient and centralized supply of power (370 watt) to all devices connected to it
  • Energy-saving functions as per IEEE 802.3az with port deactivation if no data is transferred
  • SD-LAN – automatic switch configuration via the LANCOM Management Cloud
  • Security with configurable access control on all ports as per IEEE 802.1X
  • Secure remote management through TACACS+, SSH, SSL, and SNMPv3
  • IPv6 and IPv4 support for modern enterprise networks
  • 5-year warranty on all components

Accessories and options

FAQ

Do you have further questions?

 

Find more information on our switches in our FAQ section.

Presales request

Do you have further questions about this product or want a personal contact?


LANCOM Presales Team

Phone: +49 2405 / 49 93 6-260

Support

Do you need help with the configuration of our products?

 

In our Knowledge Base you can find help and precise instructions on how to use all LANCOM products. For more professional assistance visit our Support portal: